whirlpool washer

Whirlpool Washer stuck on sensing? Here’s 10 solutions!

Whirlpool Washer stuck on sensing?

Nothing is more annoying than a Whirlpool washer stuck on sensing setting. Your entire washing schedule may become messed up by a broken washer, leaving you with a mountain of unwashed clothing.

Fortunately, there are various techniques to diagnose and resolve this problem. In this blog post, we’ll explore in depth ten options to get your Whirlpool washer back on track and functioning properly. You may detect and resolve the issue with your washer by following the instructions for each of these steps, which will be extensively discussed.

If you’ve got Whirlpool washer sensing issues, you’ve come to the right place.

Want to know what the soil level on your washing machine means, take a look at this article.

1. Ensure the Washer is Level

If a Whirlpool washer is not level on the floor, this will typically result in the sensing cycle being stuck. Since it might not be able to determine the load’s weight with accuracy, a washing machine that is not correctly balanced may have trouble finishing the sensing cycle. Use a spirit level to check the alignment of your washer to make sure it is level. Make any required adjustments to the leveling feet on the machine’s base to get it exactly level. This little action can frequently fix the detecting problem and let your washer continue the wash cycle.

2. Check the Lid or Door Switch

A malfunctioning or incorrectly engaged lid or door switch is another potential root cause of the sensing issue. This safety feature makes sure that the washing machine won’t start up unless the lid or door is firmly shut. The washer might not continue through the detecting cycle if the switch is broken or not activated. Verify that the lid or door is shut all the way and latches securely. You might need to replace the lid or door switch if the issue doesn’t go away.

3. Load Distribution

The sensing cycle may stop entirely or take longer due to an uneven load. This is due to the fact that the washer must precisely determine the weight and distribution of the load to guarantee correct water levels and wash cycle settings.

Before beginning the wash cycle, spread your material evenly inside the drum to prevent an uneven load. Ensure the drum is not completely filled with heavy objects, including towels and blankets. Maintaining an equal load distribution might assist your washer in completing the sensing cycle and starting the cleaning process.

If you can’t identify any technical problems, but your Whirlpool washer stays on sensing, the load distribution could be the reason.

4. Clean your Whirlpool Washer stuck on sensing mode

Detergent and dirt can accumulate within your washing machine over time and interfere with the sensing cycle. A stopped sensing cycle might be caused by a washer that is unclean, which makes it unable to effectively determine the weight of the load. Do a cleaning cycle in your washer using a washing machine cleanser or a solution of white vinegar and baking soda. This will assist in removing any buildup and enhance the functionality of your washer as a whole.

5. Reset the Washer

If your Whirlpool washer keeps sensing, you will need to reset it to stop the cycle. A washer that is stuck on the sensing cycle may just need to be reset occasionally. Wait 1-2 minutes after unplugging your washing machine before connecting it back in. The washer’s control board will be able to reset as a result, which may help to fix any software problems that could be causing the sensing cycle to stall.

A Whirlpool washer sensor reset could get your appliance working again in no time.

6. Check for Error Codes

Several Whirlpool washers feature an error code system that may be used to troubleshoot problems the machine. See your user manual or the Whirlpool website for details on the exact code and how to fix it if your washer is showing an error code. You might be able to fix the Whirlpool washing machine stuck on sensing problem and get it running again by following the suggested troubleshooting procedures.

7. Inspect the Water Inlet Valve and Hose

A damaged or broken water intake valve or hose may be the cause of your washer’s failure to fill with water during the sensing cycle. Inspect the hoses for any kinks or damage that could be obstructing water flow, and make sure they are firmly attached to both the washer and the water supply.

The water intake valve, which regulates the flow of water into the washer, may also have blocked filter screens. Disconnect the hoses, switch off the washer’s water supply, and then gently remove the screens with a little brush or cloth. Reattach the hoses and restart the water supply after cleaning the screens. This can assist in resolving water flow concerns and enable the sensing cycle to continue as usual.

This is a pretty unknown way to fix a Whirlpool stuck on sensing, but can definitely sort your problem.

8. Check the Drain Pump and Hose

The washer has to make sure there is appropriate drainage before starting the wash cycle, thus a blocked or broken drain pump might also cause the sensing cycle to stop. Check the drain pump and hose for any damage or obstructions. Remove any debris from the pump and hose as necessary to ensure adequate drainage. To fix the sensing problem, you might need to replace the drain pump if it seems broken or defective.

Not only is this an effective way of fixing your Whirlpool washer stuck in sensing mode, it’s also good practice to regularly clean your pump from dirt that might be blocking drainage.

9. Examine the Motor Coupling

The motor coupling, which links the motor and transmission to enable the washer to agitate and spin, is an essential part. The washer may struggle to go through the sensing cycle if the motor connection is old or broken. To test the motor coupling, you must unplug the washer from the power supply, remove the cabinet, and physically inspect the coupling for any signs of wear or breakage. To get the washer working properly again, you’ll need to repair the motor coupling if it’s broken.

The motor coupling could be the culprit for your washing machine stuck in sensing mode.

10. Consult a Professional Technician

It might be time to call a professional technician if you’ve tried all of these troubleshooting techniques and your Whirlpool washer is still stuck on the sensing cycle. Your washer may be carefully diagnosed and fixed by a qualified expert, ensuring that it operates correctly and effectively. Professional assistance may be expensive, but doing so can help your appliance last longer and ultimately save you time and hassle.

A professional technician will be able to tell you why your Whirlpool washer won’t go past sensing cycle during a wash. This is something that’s difficult to identify yourself.


Although a Whirlpool washer stuck on sensing cycle might be quite inconvenient, you can frequently fix the problem yourself if you follow the appropriate troubleshooting procedures. You may find and solve the issue with your washer by using the 10 solutions listed in this article, and you’ll soon be doing clean, fresh laundry again. Don’t forget that some problems can require expert help, so if that’s the case, don’t hesitate to get in touch with a specialist or Whirlpool customer support.

If you continue to have issues with your washing machine, you might want to get yourself a portable washer and dryer.

2 Responses

Add a Comment

Your email address will not be published. Required fields are marked *